SprayTans™ captures the synergy between science and nature to offer you professional high tech patented equipment with the highest quality, natural, organic pharmaceutical-grade sunless products.

 

Spray Tans™ is well-known for inventing HLVP spray tanning, the “Laser Tan™” and organic based, drip free sunless solutions. 

  

SprayTans™ has the only patented applicator that both reduces overspray and delivers flawless tanning results. It is the only Spray System to have the United States EPA EV testing results showing a 39% reduction in overspray with the added benefit of increasing the quality of the clients sunless  tan.

 

EPA VERIFICATION TEST DESCRIPTION

 The United States Environmental Protection Agency created the Environmental Technology Verification Program to facilitate the deployment of innovative environmental technologies through performance verification and dissemination of information.

The ETV CCEP evaluated the pollution prevention capabilities of the Laser Touch™ targeting device for manual spray operations. The test was conducted under representative factory conditions at the Iowa Waste Reduction Center's (IWRC) Painting and Coating Compliance Enhancement facility. This test was designed to verify that the Laser Touch™ can provide an environmental benefit over unassisted manual spray application systems while maintaining or improving the finish quality of the applied coating. To quantify these benefits, several painters with varying degrees of experience were asked to coat test parts as they normally would to establish their unassisted baseline, then they were trained on the use of the Laser Guide and asked to coat the same type of parts using the targeting device. The Laser Guide was verified to provide an improvement of the painter's transfer efficiency (TE) and improve the finish quality of their finished parts. The improvement in TE leads to a reduction in product usage and a reduction of volatile organic compound (VOC) and hazardous air pollutant (HAP) emissions.

VERIFICATION AND PERFORMANCE

Relative Transfer Efficiency (TE) Improvement: The Laser provided a relative improvement up to 38.8% in emission reduction over the non Laser Guide spraying. Rated best for Environmental work space.

Cost Savings: The TE improvement of the Laser Guide provides an economic advantage in terms of reduced product usage and overspray generation.

 

Quality Improvement: The visual appearance of the Laser Guided spray was determined to be better than that of the non Laser Guided sprayed parts. The Laser Guided parts had a  more even coating coverage and reduced appearance of striping or runs.